T2015-TFC-02 Tanktech(TKT) Portable Oil-Water Interface Detector (30m)

Tanktech(TKT) T2015-TFC-02 (30m)
TAPE:30M

TANKTECH's Portable Oil/Water Interface Detector, T2015 series offer the total solution for management of cargo in tanks. This device can detect and measure the Ullage, Oil/Water Interface and Temperature of cargo at the same time.

Certification (T2015-TFC-02)

TANKTECH's Portable Oil/Water Interface Detector, T2015 series has been approved for the electrical intrinsic safety by the following authorities.

IECEx BAS 16.0118X

Ex ia IIB T4 Ga / -20°C < Ta < +50°C / -40°C ≤ Tp ≤ +90°C

Standards used

IEC 60079-0:2011 / IEC60079-11:2011
 

Baseefa16ATEX0151X

II 1 G Ex ia IIB T4 Ga / -20°C < Ta < +50°C / -40°C ≤ Tp ≤ +90°C

Standards used

EN 60079-0:2012 / EN 60079-11:2012

Specifications(T2015-TFC-02)

Model : T2015-TFC-02

Accuracy of ullage, interface detection	±2 mm
Indication of level divided by ullage and interface	Visible and Audible
Tape length	15M / 30M / 40M
Tape graduation	Metric
Tape resolution	1 mm
Diameter of probe	34 mm
Minimum detectable level	8 mm
Ambient temperature range	-20℃ to 50℃
Temperature sensor measurement range	-40℃ to 90℃
Temperature measurement resolution	0.1℃
Accuracy over calibration range	±0.1℃ (0℃ to 60℃)
Temperature reading mode	℃ (Celsius) or ℉
LCD display	4-7 Segment
Ball valve coupling (Top mounting of model: TVC-02 Or cheaper ones M-SS-T2)	PF 2-1/4" TAP
Weight	6.1 kg / 30M
Overall dimensions (height × width × thickness)	APP. 585 × 346 × 150 mm
Battery	Duracell Plus 9 Volt (MODEL MN1604 6LR61 PP3)
Intrinsically safe type	IECEx: Ex ia IIB T4 Ga (-20℃ ≤ Ta ≤ 50℃) ATEX: II 1 G (-20℃ ≤ Ta ≤ 50℃)